Haomei Logo
	Stucco Embossed Aluminum

Embossed Aluminum Jacketing

  • Alloy1100, 1060, 3003, 3105, 5005
  • TemperO / H12 / H14 / H16 / H18 / H22 / H24 / H26
  • Thickness0.3-1.2mm
  • Port of Loadingqingdao
  • CertificatedISO9001:2015
Email

Stucco Embossed Aluminum Jacketing / Cladding is made out of embossed aluminum metal roll. The inside of the aluminum pipe jacket is coated with a poly moisture retarder that provides an excellent resistance to moisture and has excellent abrasion protection during installation.

The Stucco Embossed Aluminum Jacketing is cut and rolled to fit each size of pipe insulation correctly. Use the chart to determine the size of the jacketing needed for the pipe insulation that you are trying to cover. Aluminum jacketing is good for mechanical abuse and for weathrizing exterior pipes. Aluminum jacketing can be installed with either 1/2" drill screws or banding and seals (fab straps).

The stucco embossed surface texture hides small imperfections and scratches caused by physical damage during or after installation. This finish also reduces reflectivity while still looking very professional. Lastly, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.

Grade: 1006, 1100, 3003, 3105, 5005

Temper: O, H12, H14, H16, H24, etc.

Common use: 3003 H14 H16, 1100 H14 H16, 5005 H14

Type: Coil roll

Application: Industrial insulation jacketing, cover, insulation protective jacketing

Thickness: 0.3-1.5mm

Width: 914mm, 1000mm, 1219mm

Length: 20, 25,30, 60, 90m per roll or as per clients

Surface Treatment: Stucco Embossed

Moisture barrier: polysurlyn, craft paper

Certificate: ISO9001, GB/T3880, ASTM B209

Packaging: packed in carton or coil in wooden pallet

Delivery time: 25-45 days

Minimum order quantity: 2 tons

Alloy Thickness(inch) Thickness(mm) Width(mm) Length(m) Suggested Application
1100, 1060, 3003, 3105, 5005
H14, H16 0.012 0.3 914, 1000, 1219 20, 25,30, 60, 90, coil OD below 36"(914mm) insulated pipe lines.
0.016 0.4 914, 1000, 1219 20, 25,30, 60, 90, coil OD below 36"(914mm) insulated pipe lines.
0.020 0.5 914, 1000, 1219 20, 25,30, 60, 90, coil OD below 36"(914mm) insulated pipe lines.
0.024 0.6 914, 1000, 1219 20, 25,30, 60, 90, coil OD 36"-8′ (914mm-2.43m) insulated pipe lines&equipment.
0.032 0.8 914, 1000, 1219 20, 25,30, 60, 90, coil special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications.
0.040 1.0 914, 1000, 1219 20, 25,30, 60, 90, coil special applications where heavy mechanical is required.
0.050 1.2 914, 1000, 1219 20, 25,30, 60, 90, coil flat ducts or precipitators. Also recommended for areas subject to high wind conditions.

Chemical Composition of stucco aluminium pipe cladding

Alloy Si Fe Cu Mn Zn Mg Ti Cr Other Elements Al

Each Total
1060 0.25 0.35 0.05 0.03 0.05 0.03 0.03 - 0.03
99.6min
1100 Si+Fe=0.95 0.05-0.20 0.05 0.10 - - - 0.05 0.15 99.0min
3003 0.6 0.7 0.05-0.20 1.0-1.50 0.10 - - - 0.05 0.15 reminder
3105 0.6 0.7 0.30 0.30-0.80 0.40 0.20-0.80 0.10 0.20 0.05 0.15 reminder
5005 0.3 0.7 0.20 0.20 0.25 0.50-1.10 - - 0.05 0.15 reminder

Related Application


Related Blog