Blog
Haomei Aluminum is a private Joint-stock Company, Registered Capital by 50,000,000 RMB, Covers an area of 80,000 square meters with more then 200 employees, including more than 30 technical and and management personnel.
What are the defects of aluminum oxidation processing?
Anodizing of aluminum and aluminum alloys is superior to chemical oxidation and can be used as the basis for final corrosion protection, decoration or coloring, dyeing and electrocoating.
Method for anodizing aluminum chromic acid
The thickness of the anodized film obtained by chromic acid anodization is 2μm~5μm, the porosity is low, the film is soft, and the wear resistance is poor.
Analysis of the factors that cause no bright surface after mechanical polishing and anodizing of aluminum parts
some researchers have also confirmed with an electron microscope that the outer layer of the polished surface is pulverized into irregular, very fine. crystalline state, etc.
Specifications and models of commonly used aluminum foil
Characteristics of PET aluminum foil composite film: aluminum foil film is a non-toxic packaging material, which can be in direct contact with food without any worries that can endanger human health.
3003-H14 Aluminum Perforated Sheet
3003-H14 Aluminum perforated sheet are generally punched, and also need to be bent and surface coated, and the final product can be used for decoration.
1060 alloy aluminum plate
1060 aluminum plate is formed in the factory and does not need to be cut during production, and can be directly processed for the second time. It is closely related to H18.
Specifications of 5052 aluminum plate / sheet
The 5052 aluminum plate is an AL-Mg series alloy aluminum plate. Magnesium is the main alloying element in the 5052 alloy aluminum plate, and it is the most widely used anti-rust aluminum.
Specifications of color-coated aluminum sheet
The color-coated aluminum sheet has the flexural strength and flexural strength required for the decorative sheet.
What is the function of 3003 aluminum plate
3003 Aluminum plate is an inevitable choice for making battery casings. Aluminum is a representative material for automobile lightweight.